Skip to main content

TC 1

Uniform 1/2" box pattern formed by ribs running on both sides in opposite directions.
If laminating, ribs on one side will be lost. Best not to laminate.
Category: Patterned Glass
Glass Type: Soda Lime
Pattern: Geometric, Symmetrical
Privacy Level: Moderate
Safety: Temperable
Style: Clear
Thickness: 5/32
Sheet Size: 65” x 85”
Labels:

Popular posts from this blog

Glass tempering technology

Glass tempering technology To make ordinary glass more resistant to shock loads, temperature changes, and also safer in the event of destruction, special high-temperature treatment is applied to it, followed by cooling - quenching. As a result of quenching, constant stresses remain in the glass material, due to which glass loses its uniformity and acquires new properties. The specific properties of tempered glass Hardened glass can not be drilled or cut - it will lead to its destruction due to the presence of internal stresses. Due to the use of glass hardening technology, it becomes 5-10 times stronger to shock loads and much more resistant to destruction due to temperature differences than ordinary glass. If tempered glass is broken, it does not carry a danger of injury to a person, since its fragments are small, with blunt edges, which cannot be cut. If you break the usual glass, formed large fragments with sharp edges, very traumatic. Glass tempering technology Use ...
Read more

What Is Sandblasting?

Sandblasting is a technology of glass processing with a high-pressure air-sand spray, formed as a result of mixing compressed air and sand (abrasive). Today sandblasting is one of the most effective ways to clean any surface. The sandblasting equipment allows to remove corrosion products, scum and carbon, as well as old colorful coatings from metal, glass, concrete, wooden and other surfaces. Glass and mirrors matting is the main operation in glassware decorating. Matting is a process of processing a glass surface or a mirror by sandblasting to obtain a matte finish. Matting can be classified into the following types depending upon complexity: •   solid matting - the whole surface becomes matte; • simple matting - the application of simple geometric shapes onto the mirror: lines, circles, squares, diamonds, etc. Sandblasting allows you to get an opaque matte surface for white glass. You can handle all the surface or only individual fragments. Sandblasting helps create ...
Read more

SUPER GREY

8% light transmission gray glass Category: Colored Glass Glass Type: Soda Lime Pattern: Flat (smooth) Privacy Level: Private Safety: Temperable, Laminatable Style: Colored Thickness: 1/4 Sheet Size: 96" x 130"
Read more