Skip to main content

Glass door replacement and installation

glass door
glass door
Installing glass doors is a complex and important process. This type of work is not very different from the method of installation of wooden linen, but still has its own characteristic differences. How to install glass doors and what to look for is an urgent question for many people. And here are the main features of such an installation:

The first feature. Due to the fact that the glass door has a weight several times larger than the wooden counterpart, the installation of such a construction on its own is an extremely complex process. Therefore, if you are not sure that you will be able to do it yourself, then it is better to rely on specialists.


The second feature. The door must be made strictly according to specific dimensions. This is due to the fact that the finished door can not be adjusted to the size of the opening. Based on this, be sure to keep track of the correct size of your glass doors and doorway sizes.

glass door
glass door
The third feature. The glass door is manufactured using a unique technology and it is virtually impossible to damage it, but it is still worth being careful when installing.

The fourth feature. The glass door needs to be fixed very well. This can be done in a box or doorway. At installation of glass doors it is possible to use both a metal, and wooden box;

The fifth feature. Accessories for glass doors differs significantly from products of this kind for wooden products.

glass door
glass door
The sixth feature. If the glass door will be actively used, consider installing pendular doors. Thus, you will increase the life and keep them longer reliable and durable. In this case, the door is fixed at the top and bottom and installed without a box
Labels:
Location: Нью-Йорк, США

Popular posts from this blog

Glass tempering technology

Glass tempering technology To make ordinary glass more resistant to shock loads, temperature changes, and also safer in the event of destruction, special high-temperature treatment is applied to it, followed by cooling - quenching. As a result of quenching, constant stresses remain in the glass material, due to which glass loses its uniformity and acquires new properties. The specific properties of tempered glass Hardened glass can not be drilled or cut - it will lead to its destruction due to the presence of internal stresses. Due to the use of glass hardening technology, it becomes 5-10 times stronger to shock loads and much more resistant to destruction due to temperature differences than ordinary glass. If tempered glass is broken, it does not carry a danger of injury to a person, since its fragments are small, with blunt edges, which cannot be cut. If you break the usual glass, formed large fragments with sharp edges, very traumatic. Glass tempering technology Use ...
Read more

What Is Sandblasting?

Sandblasting is a technology of glass processing with a high-pressure air-sand spray, formed as a result of mixing compressed air and sand (abrasive). Today sandblasting is one of the most effective ways to clean any surface. The sandblasting equipment allows to remove corrosion products, scum and carbon, as well as old colorful coatings from metal, glass, concrete, wooden and other surfaces. Glass and mirrors matting is the main operation in glassware decorating. Matting is a process of processing a glass surface or a mirror by sandblasting to obtain a matte finish. Matting can be classified into the following types depending upon complexity: •   solid matting - the whole surface becomes matte; • simple matting - the application of simple geometric shapes onto the mirror: lines, circles, squares, diamonds, etc. Sandblasting allows you to get an opaque matte surface for white glass. You can handle all the surface or only individual fragments. Sandblasting helps create ...
Read more

Scopes of tempered glass

Due to the properties of the material, tempered glass sheets are characterized by increased resistance to attempts to damage them. If you try to break the glass, the last hardening, you can find that it breaks into fragments with blunt edges, which can not injure the skin. This is the safety of the material. tempered glass  The hardening process is carried out on special equipment by means of strong heating of the glass, which, when it reaches a certain temperature, is subjected to instant cooling, which gives the desired effect. Moving from a moving mass to a solid, the glass structure is accompanied by a change in its physical parameters, since the bonds of the molecular level in it become stronger. With the help of this technology, the formation of compression stress points in the glass structure is realized, due to which glass becomes mechanically more durable and capable of withstanding significant temperatures without damage, as well as sudden temperature fluctuations...
Read more